Brinkmann S810I Illuminating the Display, Storing Lap and Split Time, Pausing the Exercise

You have three optional Exercise modes depending on the selected exercise:

•BasicUse (E0)

•BasicSet (E8)

•Profiles (E1-E7)

The following functions can be used during all three optional Exercise modes.

Illuminating the Display

Press the signal/light button.

After you use backlight once in the Measure mode, the receiver automatically illuminates the display when you start /stop the exercise session, store lap information end an interval and recovery calculation.

Storing Lap and Split Time

Press OK to store lap and split time.

First	Then
Lap time	Split time
Average heart
rate of the lap
Number of
the lap

C 42

Receiver automatically stores a lap time when you stop recording an exercise. You can store 99 laps if you have not used the profile function. After storing 99 laps FULL appears for a few seconds every time you take a lap. You can continue taking laps but they will not be recorded. The wrist receiver continues recording all other information of the exercise, except lap and Profile information.

Pausing the Exercise

Press the stop button.

The exercise recording, stopwatch and other calculations are paused. To continue them, press OK. Or, to return to the Time of Day display, press and hold the stop button.

The receiver automatically returns to the Time of Day display within 5 minutes if you forget to quit the heart rate measuring after having stopped the stopwatch and taken the transmitter off your chest.

Swapping the Displayed Exercise Information

There are three display options, which you can swap between by pressing the down button. The receiver saves the upper and lower row settings for the three display options. If the Help function is on, the name of the selected function appears for a few seconds.

Time of Day	Time of Day	Stopwatch
Stopwatch	Lap time	Time of Day
Current
heart rate
Number of the lap
	C 43

S810i manual USA GBR A.pm6 42-43

29.7.2002, 14:14