Brinkmann S810I user manual Buttons and Their Functions, Reset, Useful Tips

Buttons and Their Functions

Signal/ Light Turns the beep on or off. Turns the backlight on.

Reset	Resets the heart rate monitor.
Stop	Return - Stops measuring the heart rate.
	Exits the displayed mode and returns to
	the previous mode level.
	Returns to the Time of Day display
	from any mode by pressing and
	holding the stop button.
OK	Accept - Starts measuring the heart rate (start).
	Enters the displayed mode shown on
	the lower level (start). Locks in your
	selection (ok). Records lap information
	(lap). The Help text (start, ok or lap)
	that appears on the display above the
	button indicates its use.

SIGNAL/

LIGHT

RESET

STOP

OK

A 6

Up Moves to the following mode. Increases the selected value.

Down Returns to the previous mode. Decreases the selected value.

Useful Tips

•Briefly pressing a button (approximately 1 second) will do different things than pressing and holding the button for a longer period of time (approximately 2 to 5 seconds). If your press the button for a longer period of time, you can use shortcuts.

•The buttons are slightly stiffer than those of an ordinary watch to prevent them from being pressed accidentally.

•You can always return to the Time of Day display from the Options setting or File recalling loops by pressing and holding the stop button.

•See the glossary for display symbols and text interpretation.

A 7

S810i manual USA GBR A.pm6 6-7

29.7.2002, 14:14