10.When you no longer need the information in the error log, press QUICKSTART for at least four seconds to erase the error log. Continue to maintain light pressure on the key until the message CLEAR? appears. Wait four seconds until OK appears, and then release the key.
Important: You cannot retrieve the error log once you have deleted it.
When the error log is cleared, 1: — — — appears in the display indicating that the error messages have been deleted.
11.When you are ready, press ENTER to move to the next display (serial number).
Displaying the Serial Number
SERIAL NUMBER appears. The serial number is helpful when you contact Customer Support.
12.If you have not already done so, write the serial number onto the Warranty Registration card. You can also register online at www.precor.com.
Note: If no serial number has been entered, then NONE appears. Use the serial number found on a label on the rear cover (Diagram 2).
13.When you are ready, press ENTER to return to the Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting | 46 |