Thank you for choosing Precor. For proper installation, please read this guide thoroughly and follow the assembly instructions. If you do not assemble the EFX according to these guidelines, you could void the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the EFX except for maintenance tasks described in the owner’s manual. Should you need more information regarding Customer Support numbers or a list of Precor authorized Service Centers, visit the Precor website at www.precor.com.
Unpacking the Equipment
The EFX is carefully tested and inspected before shipment. The unit is shipped in one box. Ask for help from two or more people to unpack and assemble the EFX.
Required Tools
•Wire tie cutter
•
•Two
•SAE Standard socket set with socket extension
Installation Requirements
Follow these installation requirements when assembling the unit:
•Assemble the unit near the location where you plan to use it.
•Provide ample space around the unit.
Open space around the unit allows for easier access.
•Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level unit has fewer malfunctions.
•Open the box and assemble the components in the sequence presented in this guide.
•Leave room for adjustments.
Tighten fasteners (bolts, nuts, and screws), so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed to do so.
EFX5.33 Elliptical Fitness Trainer Assembly Guide | 2 |