Weider 831.154021 user manual Repeat this step with the other Weight Guide

9.	Slide two Weight Bumpers (45) onto the Weight	44
	Guides (44). Slide the eight Weights (55), with the
	pin holes on the indicated side, onto the Weight
	Guides.
	Press the Weight Tube Bumper (46) into the
	Weight Tube (47). Insert the Weight Tube into the
	stack of Weights (55). Make sure the pin on the
	Weight Tube sits in the groove in the top
	Weight.
	Grease the indicated holes in the Top Weight (56)
	with an included grease pack. Slide the Top
	Weight onto the Weight Guides (44).

Holes

10. Attach the Right Top Frame (5) to the Right		10
Upright (2) with two M8 x 78mm Bolts (82), two
		82
M8 Washers (98), and two M8 Nylon Locknuts
(91). Do not tighten the Locknuts yet. Make
sure	the Weight Guides (44) are behind the	98.
Right	Top Frame.	5

91

44- -44

11. Attach a Weight Guide (44) to the Right	Top	11
Frame (5) with an M8 x 78mm Bolt (82),	two M8		82
Washers (98), and an M8 Nylon Locknut (91). Do
not tighten the Locknut yet.		5	i_98

Repeat this step with the other Weight Guide (44).

9