Electrolux LAVAMAT 74650 A3 user manual Technical Data, Technical data, Not spin

28Technical data

Problem		Possible cause/Solution
		The electronic unbalance detection device has
		cut in because the laundry is not evenly distribŠ
		uted in the drum. The laundry is redistributed
		by reverse rotation of the drum. This may hapŠ
Spinning starts late or the machine does		pen several times before the unbalance disapŠ
		pears and normal spinning can resume. If, afŠ
not spin:		ter some minutes, the laundry is still not evenŠ
		ly distributed in the drum, the machine will
		not spin.
		• The laundry load is perhaps to little, add
		more items, redistribute the load manually
		and then select the spinning programme.
		The machine is fitted with a type of motor
		which makes an unusual noise compared with
The machine makes an unusual noise:		other traditional motors. This new motor enŠ
		sures a softer start and more even distribution
		of the laundry in the drum when spinning, as
		well as increased stability of the machine.
No water is visible in the drum:		Machines based on modern technology operŠ
		ate very economically using very little water
		without affecting performance.
		Anti-flooding system has activated.
The display shows the alarm code	:	• Disconnect the appliance, close the water
		tap and contact the Service Force Centre

If you are unable to identify or solve the probŠ lem, contact our service centre. Before telephonŠ ing, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

TECHNICAL DATA

Dimensions

Electrical connection

Width	60 cm
Height	85 cm
Depth	63 cm

Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door.