7
9DELAY START button
10 Indicator pilot lights
Table of Symbols
= Rinse hold
= Handwash
= Cold
= Child safety lock
Display (7)
7.1 | 7.2 |
| 7.3 |
7.5 |
|
| 7.4 |
7.1Child safety lock symbol
• Duration of selected programme : after selecting a programme, the duration is dis played in hours and minutes (for example 2.05). The duration is calculated automati cally on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
• Alarm codes : in the event of operating problems, some alarm codes can be displayed, for example E20 (see chapter «What to do if...»).
• End of programme : when the programme has finished a blinking zero 
is dis played, the symbol 7.5 (Door locked) disappears on the display, the pilot light of but ton 8 goes out and the door can be opened.
• Incorrect option selection : if an option which is not compatible with the set wash programme is selected, the message Err is displayed for a few seconds and the yellow pilot light of button 8 light starts blinking.
• Delay Start : the selected delay (20 hours max) set by the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is displayed. The symbol 7.3 will appear on the display. The delay time value decreases by one unit every hour. When only 1 hour remains, the time decreases every minute.
7.3Delay Start - symbol
7.4Programme progress display : the display shows the different washing pro gramme phases. After the appliance starts operating, the display show the relevant sym
bol of the washing phase which is running: 
= WASHING, 
= RINSING, 
= DRAIN ING, 
= SPINNING - symbols