Miele T 7634 Proper drying, Brief instructions, Preparing the laundry, Turn on the dryer

Page 12

Proper drying

Brief instructions

The operating steps identified with numbers(￿, ￿, ￿, ...) may be used as short-cut instructions.

￿Preparing the laundry

Loosen the washed garments and sort them by: . .

. . . desired drying level,

.. . type of fabric and finish,

.. . size,

.. . same residual moisture content after spinning.

This will produce very even drying.

￿Remove foreign objects like detergent dispensing devices from the laundry. They can melt and damage the dryer and the wash.

Check hems and seams to ensure that linings don't come out.

Close duvet covers and pillowcases to prevent small items from getting inside.

Fasten hooks and close buttons.

Tie fabric belts together.

￿Turn on the dryer

You may also switch the dryer on after loading it, as the drum will not be illuminated, to save energy.

￿To turn it on, press the I-On/0-Offbutton.

￿Loading the dryer

￿Press the Door button to open.

￿Place the laundry loosely in the drum.

Do not exceed maximum loads specified in the "Program Overview" Section.

Overloading may cause wear and tear on the laundry and adversely affects drying.

￿Before closing the door, check that the lint filter is properly inserted in the door casing.

Ensure that no small items are jammed in the door, because they might otherwise be damaged.

12

Image 12
Contents Operating Instructions Vented dryer 7634 Caring for the environment Disposal of packing materialDisposing of your old appliance Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Fault indicator / Optical interface Operating the dryerControl panel DisplayDelay Program duration/ Estimated time remainingProgrammable functions Care symbols Laundry careDrying tips DryingLaundry care Proper drying Brief instructionsPreparing the laundry Turn on the dryerExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Options/Delay DelayGentle BuzzerProgram Overview Normal Extra dry, NormalHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironWoolens SmoothingExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed cold Timed warmSwitching over from a running program Changing the program sequenceLoading or removing laundry Time remainingElectronic lock Activating the lockDeactivating the lock Cleaning and care Cleaning door lint filterCleaning the lint screen without water Cleaning the lint screen with waterCleaning port-hole grilles Cleaning the dryerTrouble shooting Test and fault messagesWhat to do, if . . . ? Problem Cause Solution Cancelling aCancelling the fault Light goes onOther faults Problem Cause Solution Synthetic-fiber laundry Items are staticallyCharged after drying There has been a lintStart and the indicator When switched onCold programs will not Lights for these programsReplacing the light bulb Customer service Program updatesWarranty conditions and warranty period Optional accessoriesInstallation and connection Front viewRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Ventilating the installation area Leveling the dryerElectrical connections Installing the dryer vent ProcedureGeneral AvoidCalculating total duct length Arrangement Left or right dryer vent openingRear or side exhaust connection Calculation exampleAt the rear Sideways to left or rightOverview of vent systems Flexible metal duct hoseExamples are shown on the next Examples Dryer vent systems from metal piping ExampleConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onChanging water conductivity setting Default setting Lower conductivity settingImportant condition Alteration rights reserved Nr 323 240