Miele T 7634 operating instructions Change function of Filter/Vent indication, Default setting

Page 49

Programmable functions

Change function of Filter/Vent indication

Lint should be removed after drying. At the same time, the Filter/Vent indicator light reminds you to do so as soon as a certain degree of lint has accumulated. You can yourself decide which degree of lint accumulation will trigger that reminder.

Determine by trial and error which of the four options responds to your drying practices.

For programming and saving in memory, follow steps ￿ to ￿.

The programmable function is programmed using the buttons.

Precondition:

The dryer is switched off.

The door is closed.

￿Press Start/Stop and keep it pressed it during steps ￿-￿.

￿Press the I-On/0-Offbutton in.

Wait until the Start/Stop button lights up continuously . . .

￿. . . then release the Start/Stop button.

￿Press the Gentle button four times.

The Gentle indicator light flashes once slowly.

P and 2 flash alternatingly in the display (default setting).

The number appearing alternatingly with P means:

0The Filter/Vent indicator is deactivated

IThe Filter/Vent indicator comes on only when there is a heavy lint buildup

(Express control light additionally flashes once)

2default setting

(the Express indicator light also flashes twice)

3The Filter/Vent indicator will come on when there is only a light lint buildup

(The Express indicator light also flashes three times)

￿Pressing the Start/Stop button switches from one to the other.

￿Using the I-On/0-Offbutton, switch the dryer off.

The programming is now stored in memory. You can change it again at any time.

49

Image 49
Contents Operating Instructions Vented dryer 7634 Disposal of packing material Caring for the environmentDisposing of your old appliance Saving energyContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Operating the dryer Fault indicator / Optical interfaceControl panel DisplayProgram duration/ Estimated time remaining DelayProgrammable functions Laundry care Care symbolsDrying tips DryingLaundry care Brief instructions Proper dryingPreparing the laundry Turn on the dryerSelect program Extra options/Select DelayDryness level selection in programs Before the end of a program Starting the programEnd of program Remove laundry Delay Options/DelayGentle BuzzerNormal Extra dry, Normal Program OverviewHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironSmoothing WoolensExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed warm Timed coldChanging the program sequence Switching over from a running programLoading or removing laundry Time remainingActivating the lock Electronic lockDeactivating the lock Cleaning door lint filter Cleaning and careCleaning the lint screen without water Cleaning the lint screen with waterCleaning the dryer Cleaning port-hole grillesTest and fault messages Trouble shootingWhat to do, if . . . ? Cancelling a Problem Cause SolutionCancelling the fault Light goes onOther faults Items are statically Problem Cause Solution Synthetic-fiber laundryCharged after drying There has been a lintWhen switched on Start and the indicatorCold programs will not Lights for these programsReplacing the light bulb Program updates Customer serviceWarranty conditions and warranty period Optional accessoriesFront view Installation and connectionCarrying the dryer to the installation site Rear view Installation siteWasher-dryer stack Leveling the dryer Ventilating the installation areaElectrical connections Procedure Installing the dryer ventGeneral AvoidArrangement Left or right dryer vent opening Calculating total duct lengthCalculation example Rear or side exhaust connectionAt the rear Sideways to left or rightFlexible metal duct hose Overview of vent systemsExamples are shown on the next Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsBuzzer normal default setting Buzzer loud Adjusting buzzer volumeFor programming and saving in memory, follow steps to Set memory function No Memory default settingMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneDefault setting Lower conductivity setting Changing water conductivity settingImportant condition Alteration rights reserved Nr 323 240