Miele T 7634 Rear view Installation site, Carrying the dryer to the installation site

Page 31

Installation and connection

Rear view

Installation site

Handgrips under the cover overhang for moving the appliance (arrows)

Power cord

Rear venting connection

This dryer can be accommodated under a worktop if there is sufficient height.

Do not install the dryer in a location where its door could conflict with room doors.

The appliance top is not removable.

Carrying the dryer to the installation site

The rear cover overhang provides handgrips for transport. To carry the dryer from its shipping base to the installation site, use the front feet of the appliance and the rear top overhang.

Washer-dryer stack

The dryer can be combined with a Miele automatic washer in a washer-dryer stack. For this, a "WTV 412" stacking unit* is required.

* Miele accessory available on order

Installation of the stacking unit may be performed only by an authorized Miele technician.

31

Image 31

Contents Operating Instructions Vented dryer 7634 Saving energy Caring for the environmentDisposal of packing material Disposing of your old applianceContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Display Fault indicator / Optical interfaceOperating the dryer Control panelProgram duration/ Estimated time remaining DelayProgrammable functions Drying Care symbolsLaundry care Drying tipsLaundry care Turn on the dryer Proper dryingBrief instructions Preparing the laundrySelect program Extra options/Select DelayDryness level selection in programs Before the end of a program Starting the programEnd of program Remove laundry Buzzer Options/DelayDelay GentleWrinkle-free Extra dry, Normal, Hand iron Program OverviewNormal Extra dry, Normal Hand iron, Rotary ironDress shirts Normal, Hand iron WoolensSmoothing Express Normal, Hand ironTimed warm Timed coldTime remaining Switching over from a running programChanging the program sequence Loading or removing laundryActivating the lock Electronic lockDeactivating the lock Cleaning the lint screen with water Cleaning and careCleaning door lint filter Cleaning the lint screen without waterCleaning the dryer Cleaning port-hole grillesTest and fault messages Trouble shootingWhat to do, if . . . ? Light goes on Problem Cause SolutionCancelling a Cancelling the faultOther faults There has been a lint Problem Cause Solution Synthetic-fiber laundryItems are statically Charged after dryingLights for these programs Start and the indicatorWhen switched on Cold programs will notReplacing the light bulb Optional accessories Customer serviceProgram updates Warranty conditions and warranty periodFront view Installation and connectionCarrying the dryer to the installation site Rear view Installation siteWasher-dryer stack Leveling the dryer Ventilating the installation areaElectrical connections Avoid Installing the dryer ventProcedure GeneralArrangement Left or right dryer vent opening Calculating total duct lengthSideways to left or right Rear or side exhaust connectionCalculation example At the rearFlexible metal duct hose Overview of vent systemsExamples are shown on the next Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsBuzzer normal default setting Buzzer loud Adjusting buzzer volumeFor programming and saving in memory, follow steps to Set memory function No Memory default settingMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneDefault setting Lower conductivity setting Changing water conductivity settingImportant condition Alteration rights reserved Nr 323 240