Miele T 7634 operating instructions Cleaning port-hole grilles, Cleaning the dryer

Page 22

Cleaning and care

Cleaning port-hole grilles

Periodically clean the screens in the door opening as well as the air passage underneath the screens.

Turn the left and right screen knobs (until you hear them click).

Grasping the knobs, pull the lint screens out towards the center .

Clean the screens under running hot water and dry them.

Also clean the air passages underneath the screens, using a vacuum cleaner, for example.

Insert the bottom of the screens and press the screens upwards.

Latch both knobs (until you hear them click).

Cleaning the dryer

Disconnect the dryer from the electrical supply.

Clean the housing, control panel and door seal only with a slightly damp cloth and mild detergent or soapy water.

Clean stainless steel parts (like the drum) with a suitable stainless steel cleaner.

Use no scouring products, cleaners containing solvents, or glass or all-purpose cleaners. They can damage plastic surfaces and other parts.

Dry all parts with a soft cloth.

22

Image 22

Contents Operating Instructions Vented dryer 7634 Disposing of your old appliance Caring for the environmentDisposal of packing material Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Control panel Fault indicator / Optical interfaceOperating the dryer DisplayProgram duration/ Estimated time remaining DelayProgrammable functions Drying tips Care symbolsLaundry care DryingLaundry care Preparing the laundry Proper dryingBrief instructions Turn on the dryerSelect program Extra options/Select DelayDryness level selection in programs Before the end of a program Starting the programEnd of program Remove laundry Gentle Options/DelayDelay BuzzerHand iron, Rotary iron Program OverviewNormal Extra dry, Normal Wrinkle-free Extra dry, Normal, Hand ironExpress Normal, Hand iron WoolensSmoothing Dress shirts Normal, Hand ironTimed cold Timed warmLoading or removing laundry Switching over from a running programChanging the program sequence Time remainingActivating the lock Electronic lockDeactivating the lock Cleaning the lint screen without water Cleaning and careCleaning door lint filter Cleaning the lint screen with waterCleaning port-hole grilles Cleaning the dryerTest and fault messages Trouble shootingWhat to do, if . . . ? Cancelling the fault Problem Cause SolutionCancelling a Light goes onOther faults Charged after drying Problem Cause Solution Synthetic-fiber laundryItems are statically There has been a lintCold programs will not Start and the indicatorWhen switched on Lights for these programsReplacing the light bulb Warranty conditions and warranty period Customer serviceProgram updates Optional accessoriesInstallation and connection Front viewCarrying the dryer to the installation site Rear view Installation siteWasher-dryer stack Ventilating the installation area Leveling the dryerElectrical connections General Installing the dryer ventProcedure AvoidCalculating total duct length Arrangement Left or right dryer vent openingAt the rear Rear or side exhaust connectionCalculation example Sideways to left or rightFlexible metal duct hose Overview of vent systemsExamples are shown on the next Examples Dryer vent systems from metal piping ExampleConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsBuzzer normal default setting Buzzer loud Adjusting buzzer volumeFor programming and saving in memory, follow steps to Set memory function No Memory default settingMemory Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onDefault setting Lower conductivity setting Changing water conductivity settingImportant condition Alteration rights reserved Nr 323 240