Miele T 7634 operating instructions Electronic lock, Activating the lock, Deactivating the lock

Page 20

Electronic lock

The lock function protects your dryer against unauthorized use.

You can activate this function whenever you wish.

It locks the dryer's electronics. It can be turned on, but no program can be started.

In such a case, the Gentle indicator light flashes and a key symbol 0-§ appears in the display.

The door may be opened at any time, as it is not locked.

Activating the lock

Precondition:

The dryer is switched off.

The door is closed.

￿Press the Gentle button and keep it pressed until Step ￿.

￿Press the I-On/0-Offbutton in.

The Express indicator light comes on.

￿Slowly turn the program selector step by step through three positions clockwise.

The three program indicator lights must light up in succession.

￿Slowly turn the program selector step by step through three positions counterclockwise.

The three program indicator lights must light up in succession.

TheGentle indicator light flashes and the key symbol 0-§ appears in the display.

￿Release the Gentle button.

The lock function has been activated.

￿You may turn off the dryer.

Deactivating the lock

Precondition:

The dryer is switched off.

The door is closed.

￿The procedure is as for "Activating the Lock". Perform steps ￿ to￿.

At step ￿ the indicator light for the Gentle button no longer flashes and the 0-§ key symbol goes out.

The lock function has been deactivated.

20

Image 20
Contents Operating Instructions Vented dryer 7634 Caring for the environment Disposal of packing materialDisposing of your old appliance Saving energyContents Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsAccessories Fault indicator / Optical interface Operating the dryerControl panel DisplayProgrammable functions DelayProgram duration/ Estimated time remaining Care symbols Laundry careDrying tips DryingLaundry care Proper drying Brief instructionsPreparing the laundry Turn on the dryerDryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Options/Delay DelayGentle BuzzerProgram Overview Normal Extra dry, NormalHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironWoolens SmoothingExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed cold Timed warmSwitching over from a running program Changing the program sequenceLoading or removing laundry Time remainingDeactivating the lock Electronic lockActivating the lock Cleaning and care Cleaning door lint filterCleaning the lint screen without water Cleaning the lint screen with waterCleaning port-hole grilles Cleaning the dryerWhat to do, if . . . ? Trouble shootingTest and fault messages Problem Cause Solution Cancelling aCancelling the fault Light goes onOther faults Problem Cause Solution Synthetic-fiber laundry Items are staticallyCharged after drying There has been a lintStart and the indicator When switched onCold programs will not Lights for these programsReplacing the light bulb Customer service Program updatesWarranty conditions and warranty period Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteCarrying the dryer to the installation site Ventilating the installation area Leveling the dryerElectrical connections Installing the dryer vent ProcedureGeneral AvoidCalculating total duct length Arrangement Left or right dryer vent openingRear or side exhaust connection Calculation exampleAt the rear Sideways to left or rightExamples are shown on the next Overview of vent systemsFlexible metal duct hose Examples Dryer vent systems from metal piping ExampleConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Programmable functions Extending the range of drying levelsFor programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Default setting Change function of Filter/Vent indicationAdjust keypad tone No Keypad tone default setting Keypad tone onImportant condition Changing water conductivity settingDefault setting Lower conductivity setting Alteration rights reserved Nr 323 240