Miele T 7634 operating instructions Options/Delay, Gentle, Buzzer

Page 15

Options/Delay

Gentle

Delicate fabrics (with the ￿symbol on the care label, such as acrylics) must be dried at lower temperatures for longer durations.

On some programs Gentle is permanently set and cannot be deselected.

Buzzer

At the end of the program a buzzer sounds at intervals, for a maximum of 1 hour.

A continuous warning tone for fault messages sounds whether the buzzer is on or off.

Delay

With the Delay option, you can select a later program start time. Program start can be delayed by 30 minutes up to a maximum of 24 hours. This enables you, for instance, to take advantage of night electricity rates.

After program selection:

￿Repeatedly press the Delay button until the required duration appears in the display.

The Delay indicator light flashes.

Times of

up to I0^ are selected in 30-minute steps,

more than I0^ in one-hour steps.

If you keep the Delay button pressed in, the time will continue to increase up to 24^.

Starting

￿Press the Start/Stop button.

– The Delay indicator light comes on.

The Delay counts down to program start as follows:

More than I0^, in whole hours.

Less than I0^, in minutes.

The drum will turn briefly every hour to prevent creasing.

Canceling / altering Delay

￿Press the Start/Stop button. The Delay is cancelled.

￿Repeatedly press the Delay button until the required duration appears in the display.

￿Press the Start/Stop button.

The Delay resumes from the beginning.

Adding laundry

You can add laundry while the Delay is still counting down:

￿Switch off the dryer.

￿Open the door and add the laundry.

￿Close the door and switch on the dryer.

15

Image 15
Contents Operating Instructions Vented dryer 7634 Saving energy Caring for the environmentDisposal of packing material Disposing of your old applianceContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Display Fault indicator / Optical interfaceOperating the dryer Control panelDelay Program duration/ Estimated time remainingProgrammable functions Drying Care symbolsLaundry care Drying tipsLaundry care Turn on the dryer Proper dryingBrief instructions Preparing the laundryExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Buzzer Options/DelayDelay GentleWrinkle-free Extra dry, Normal, Hand iron Program OverviewNormal Extra dry, Normal Hand iron, Rotary ironDress shirts Normal, Hand iron WoolensSmoothing Express Normal, Hand ironTimed warm Timed coldTime remaining Switching over from a running programChanging the program sequence Loading or removing laundryElectronic lock Activating the lockDeactivating the lock Cleaning the lint screen with water Cleaning and careCleaning door lint filter Cleaning the lint screen without waterCleaning the dryer Cleaning port-hole grillesTrouble shooting Test and fault messagesWhat to do, if . . . ? Light goes on Problem Cause SolutionCancelling a Cancelling the faultOther faults There has been a lint Problem Cause Solution Synthetic-fiber laundryItems are statically Charged after dryingLights for these programs Start and the indicatorWhen switched on Cold programs will notReplacing the light bulb Optional accessories Customer serviceProgram updates Warranty conditions and warranty periodFront view Installation and connectionRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Leveling the dryer Ventilating the installation areaElectrical connections Avoid Installing the dryer ventProcedure GeneralArrangement Left or right dryer vent opening Calculating total duct lengthSideways to left or right Rear or side exhaust connectionCalculation example At the rearOverview of vent systems Flexible metal duct hoseExamples are shown on the next Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneChanging water conductivity setting Default setting Lower conductivity settingImportant condition Alteration rights reserved Nr 323 240