Miele T 7634 Cold programs will not, Start and the indicator, Lights for these programs, Come on

Page 27

 

 

 

Trouble shooting

 

 

 

 

 

 

 

Problem

Cause

Solution

The Dress shirts,

The cause is not imme-

– Switch the dryer off and

Denim/Jeans, and Timed

diately obvious.

 

then on again.

cold programs will not

 

– Select one of the

start and the indicator

 

 

programs.

lights for these programs

 

– If the program will still

do not come on.

 

 

 

not start, there is a fault.

 

 

 

 

 

 

Contact Miele customer

 

 

 

service.

 

 

Meanwhile, use another

 

 

 

program.

The dryer will not start

The cause is not imme-

– Is the dryer switched

when switched on.

diately obvious.

 

on?

 

 

Is it plugged in?

 

 

Is the door closed?

 

 

Check fuses or circuit

 

 

 

breakers.

Drum lighting does not

The lighting switches off

Switch the dryer off and on

come on.

automatically to save

again.

 

energy.

 

 

 

The bulb may need

You can replace the bulb:

 

changing.

See the end of this section.

27

Image 27
Contents Operating Instructions Vented dryer 7634 Saving energy Caring for the environmentDisposal of packing material Disposing of your old applianceContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Display Fault indicator / Optical interfaceOperating the dryer Control panelDelay Program duration/ Estimated time remainingProgrammable functions Drying Care symbolsLaundry care Drying tipsLaundry care Turn on the dryer Proper dryingBrief instructions Preparing the laundryExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Buzzer Options/DelayDelay GentleWrinkle-free Extra dry, Normal, Hand iron Program OverviewNormal Extra dry, Normal Hand iron, Rotary ironDress shirts Normal, Hand iron WoolensSmoothing Express Normal, Hand ironTimed warm Timed coldTime remaining Switching over from a running programChanging the program sequence Loading or removing laundryElectronic lock Activating the lockDeactivating the lock Cleaning the lint screen with water Cleaning and careCleaning door lint filter Cleaning the lint screen without waterCleaning the dryer Cleaning port-hole grillesTrouble shooting Test and fault messagesWhat to do, if . . . ? Light goes on Problem Cause SolutionCancelling a Cancelling the faultOther faults There has been a lint Problem Cause Solution Synthetic-fiber laundryItems are statically Charged after dryingLights for these programs Start and the indicatorWhen switched on Cold programs will notReplacing the light bulb Optional accessories Customer serviceProgram updates Warranty conditions and warranty periodFront view Installation and connectionRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Leveling the dryer Ventilating the installation areaElectrical connections Avoid Installing the dryer ventProcedure GeneralArrangement Left or right dryer vent opening Calculating total duct lengthSideways to left or right Rear or side exhaust connectionCalculation example At the rearOverview of vent systems Flexible metal duct hoseExamples are shown on the next Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneChanging water conductivity setting Default setting Lower conductivity settingImportant condition Alteration rights reserved Nr 323 240