Miele T 7634 Trouble shooting, What to do, if . . . ?, Test and fault messages

Page 23

Trouble shooting

What to do, if . . . ?

You can remedy most problems yourself. In many cases you can save time and expense, since you will not have to call in customer service.

The following tips should help you locate and remedy the cause of a problem. Please note the following:

￿Repairs to electrical appliances should only be carried out by qualified professionals. Work performed by unqualified persons can place the user at considerable risk.

Test and fault messages.

Problem

Cause

Solution

 

 

 

Cancelling a program

This is not a fault.

In future, dry individual

0 and End appear in

The electronics recognizes

laundry items with the

the display

that there is no laundry in

Timed warm program.

The buzzer sounds.

the drum and cancels the

Cancelling test message:

 

program.

– Open and close door

 

Drying of single or already

 

 

dried laundry items can

 

 

also lead to program

 

 

cancellation.

 

 

 

 

0-§appears in the

The lock function has been

If you wish to dry, you must

display.

activated.

disable the lock function

Gentle indicator light

 

(see "Electronic lock

flashes.

 

function").

 

 

 

Cancelling a program

The cause is not immedi-

– Switch the dryer off and

The buzzer sounds.

ately obvious.

then on again.

Flashing display may

 

– Start a program.

show Cold air or End.

 

If program interruption and

 

 

error message occur, a

 

 

fault is present. Contact

 

 

Miele customer service.

 

 

 

23

Image 23
Contents Operating Instructions Vented dryer 7634 Saving energy Caring for the environmentDisposal of packing material Disposing of your old applianceContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Display Fault indicator / Optical interfaceOperating the dryer Control panelProgrammable functions DelayProgram duration/ Estimated time remaining Drying Care symbolsLaundry care Drying tipsLaundry care Turn on the dryer Proper dryingBrief instructions Preparing the laundryDryness level selection in programs Extra options/Select DelaySelect program End of program Remove laundry Starting the programBefore the end of a program Buzzer Options/DelayDelay GentleWrinkle-free Extra dry, Normal, Hand iron Program OverviewNormal Extra dry, Normal Hand iron, Rotary ironDress shirts Normal, Hand iron WoolensSmoothing Express Normal, Hand ironTimed warm Timed coldTime remaining Switching over from a running programChanging the program sequence Loading or removing laundryDeactivating the lock Electronic lockActivating the lock Cleaning the lint screen with water Cleaning and careCleaning door lint filter Cleaning the lint screen without waterCleaning the dryer Cleaning port-hole grillesWhat to do, if . . . ? Trouble shootingTest and fault messages Light goes on Problem Cause SolutionCancelling a Cancelling the faultOther faults There has been a lint Problem Cause Solution Synthetic-fiber laundryItems are statically Charged after dryingLights for these programs Start and the indicatorWhen switched on Cold programs will notReplacing the light bulb Optional accessories Customer serviceProgram updates Warranty conditions and warranty periodFront view Installation and connectionWasher-dryer stack Rear view Installation siteCarrying the dryer to the installation site Leveling the dryer Ventilating the installation areaElectrical connections Avoid Installing the dryer ventProcedure GeneralArrangement Left or right dryer vent opening Calculating total duct lengthSideways to left or right Rear or side exhaust connectionCalculation example At the rearExamples are shown on the next Overview of vent systemsFlexible metal duct hose Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsFor programming and saving in memory, follow steps to Adjusting buzzer volumeBuzzer normal default setting Buzzer loud Memory No Memory default settingSet memory function Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneImportant condition Changing water conductivity settingDefault setting Lower conductivity setting Alteration rights reserved Nr 323 240