Miele T 7634 operating instructions Vent collector duct

Installing the dryer vent

￿Vent collector duct

To prevent condensed water buildup in the non-operating dryers:

￿For each dryer, install a non-return flap R directly on the collector duct. You will need an optional Miele accessory* (see right) for this.

When installing from 3 to a maximum of 5 dryers, the pipe diameterD must be enlarged.

Number	Pipe diameter multiplication
of	factor from Table II
dryers
1-2	1

31,25

4 - 5 1,5

1Connection to connection duct

2 Miele non-return flap*

3 additional Miele Adapter*

4 Vent hose, flexible

￿Press the non-return flap(2) fully into the Adapter (3).

41