Miele T 7634 operating instructions Programmable functions, Extending the range of drying levels

Page 45

Programmable functions

Extending the range of drying levels

You can extend the range of the drying levels for many of the programs:

Rotary iron+

(dryer than Rotary Iron).

Hand iron+

(dryer than Hand iron).

Normal +

(dryer than Normal).

Additionally, the Extra dry level can be selected for the Mixed and Denim Jeans programs.

This programmable function is also effective in the following programs: Normal, Wrinkle free*, Mixed*, Express, Denim/Jeans

(* no Rotary iron+).

For programming and saving in the memory, follow steps ￿ to ￿.

The programmable function is programmed using the buttons.

Precondition:

The dryer is switched off.

The door is closed.

￿Press Start/Stop and keep it pressed it during steps ￿-￿.

￿Press the I-On/0-Offbutton in.

Wait until the Start/Stop button lights up continuously . . .

￿. . . then release the Start/Stop button.

The Gentle indicator light flashes twice briefly.

P and 0 flash alternatively in the display (default setting).

The number appearing alternatively with P means:

0Default setting

IDrying range steps added

(Express indicator light also flashes)

￿Pressing the Start/Stop button switches from one to the other.

￿Using the I-On/0-Offbutton, switch the dryer off.

The programming is now stored in memory. You can change it again at any time.

To select the extended drying level:

￿Select a program.

￿Press the drying level button repeatedly until one or two indicator lights come on.

Indicator lights Extra dry and Normal = Normal+

Indicator lights Normal and Hand iron = Hand iron+

Indicator lights Hand iron and Rotary iron = Rotary iron+

45

Image 45
Contents Operating Instructions Vented dryer 7634 Disposal of packing material Caring for the environmentDisposing of your old appliance Saving energyContents Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyAccessories Operating the dryer Fault indicator / Optical interfaceControl panel DisplayDelay Program duration/ Estimated time remainingProgrammable functions Laundry care Care symbolsDrying tips DryingLaundry care Brief instructions Proper dryingPreparing the laundry Turn on the dryerExtra options/Select Delay Select programDryness level selection in programs Starting the program Before the end of a programEnd of program Remove laundry Delay Options/DelayGentle BuzzerNormal Extra dry, Normal Program OverviewHand iron, Rotary iron Wrinkle-free Extra dry, Normal, Hand ironSmoothing WoolensExpress Normal, Hand iron Dress shirts Normal, Hand ironTimed warm Timed coldChanging the program sequence Switching over from a running programLoading or removing laundry Time remainingElectronic lock Activating the lockDeactivating the lock Cleaning door lint filter Cleaning and careCleaning the lint screen without water Cleaning the lint screen with waterCleaning the dryer Cleaning port-hole grillesTrouble shooting Test and fault messagesWhat to do, if . . . ? Cancelling a Problem Cause SolutionCancelling the fault Light goes onOther faults Items are statically Problem Cause Solution Synthetic-fiber laundryCharged after drying There has been a lintWhen switched on Start and the indicatorCold programs will not Lights for these programsReplacing the light bulb Program updates Customer serviceWarranty conditions and warranty period Optional accessoriesFront view Installation and connectionRear view Installation site Carrying the dryer to the installation siteWasher-dryer stack Leveling the dryer Ventilating the installation areaElectrical connections Procedure Installing the dryer ventGeneral AvoidArrangement Left or right dryer vent opening Calculating total duct lengthCalculation example Rear or side exhaust connectionAt the rear Sideways to left or rightOverview of vent systems Flexible metal duct hoseExamples are shown on the next Examples Example Dryer vent systems from metal pipingConnecting directly to a wall Side view vent Vent collector duct Washer-dryer stack Technical data Programmable functions for changing Standard values Extending the range of drying levels Programmable functionsAdjusting buzzer volume Buzzer normal default setting Buzzer loudFor programming and saving in memory, follow steps to No Memory default setting Set memory functionMemory Extending cooldown time Change function of Filter/Vent indication Default settingNo Keypad tone default setting Keypad tone on Adjust keypad toneChanging water conductivity setting Default setting Lower conductivity settingImportant condition Alteration rights reserved Nr 323 240