Miele T 4839 Ci Before using for the first time, Setting the language, Setting the time of day

Page 13

Before using for the first time

When the tumble dryer is switched on for the first time, the welcome screen will appear.

The welcome screen will appear in the display every time you switch the machine on until you have run a programme lasting longer than 1 hour.

The display for setting the language will then appear.

Setting the language

You need to select the language you require for the display.

You can select a different language from the one shown.

It is possible to change the language at any time via the Settings menu.

Language

english

)	OK

^Select the language you require by

pressing the left hand Menu button under ~.

^Confirm your selection by pressing the right hand Menu button under OK.

The display for setting the time will then appear.

Setting the time (of day)

12:00

ChangeOK

^Select the hours you want by pressing the left hand Menu button under Change, and confirm this with the right hand Menu button under OK.

^Then set and confirm the minutes. The entry menu will appear.

Entry menu

The entry menu showing the current time of day will appear after the machine has been switched on, until you select a programme.

10 : 00

Select programme

^You can now load the laundry into the dryer and select a programme as described in "How to dry correctly".

13

Image 13

Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerDisplay Selecting and displaying settingsSelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsSetting the language Before using for the first timeSetting the time of day Entry menuTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerFurther programmes Select a programmeRemove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programmeExtra options Low temperatureShort Anti-creaseTo select delay start Delay startTo begin delay start To alter delay startProgramme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare AutomaticCool air DenimWarm air Standard pillows Normal drying levelSportswear Silks handcareOuterwear Proofing Normal drying levelCottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygieneOnce a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remainingEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideAppears after Is cancelled,Programme has FinishedOther problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit hasIndicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not startChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteAligning the appliance Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language JDrying levels Time of dayExtended cool down To set the clock formatTo activate the lock code Airways indicatorTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedContrast Brightness Keypad toneStandby display MemoryAlteration rights reserved/2008