Miele T 4839 Ci operating instructions Cleaning and care, Emptying the condensed water container

Page 26

Cleaning and care

Emptying the condensed water container

The condensed water will be collected in the condensed water container unless the appliance has been set up to drain via thedrain hose (see installation).

Empty the condensed water container after every drying programme.

The drying programme will be interrupted if the maximum level of the condensed water container is reached. A message will appear in the display.

^Holding the container firmly in both hands, as shown, pull it out slightly towards the right-hand side.

^Hold the container in a horizontal position when carrying it.

^Open the shutter and empty out the water.

^To replace the container, hold it at a slight angle (as when removing it) and push it in gently until you feel it click into position.

^To remove the message from the display, switch the dryer off and then on again.

Condensed water should not be consumed. It could lead to health problems for people and animals.

Condensed water can be put to household use (e.g. used in a steam iron or humidifier). To ensure that any residual particles of fluff in the condensed water are removed before use, pass it through a fine sieve or paper filter first.

26

Image 26
Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelSelecting programmes via the display Selecting and displaying settingsDisplay Menu buttons Programme duration / Estimated time remainingSetting the time of day Before using for the first timeSetting the language Entry menuCare symbols Tips on dryingSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect a programme Further programmesStart the programme Select any Extra options / Delay startRemove the laundry when the programme has finished Before the end of a programmeShort Low temperatureExtra options Anti-creaseTo begin delay start Delay startTo select delay start To alter delay startProgramme chart Woollens handcare DelicatesNormal+, Normal, Hand iron r, Hand iron rr, Machine iron AutomaticWarm air DenimCool air Standard pillows Normal drying levelOuterwear Silks handcareSportswear Proofing Normal drying levelMinimum iron hygiene Normal drying level Hygiene programmesCottons hygiene Normal drying level Timed drying hygieneAdding or removing laundry after a programme has started Changing the programme sequenceOnce a programme has started Time remainingCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Fault messages in the displayProgramme has Is cancelled,Appears after FinishedOther problems Machine after Problem Possible cause Remedy Water leaks fromBeen cleaned Condenser unit hasWhen a programme is Problem Possible cause Remedy Programme doesIndicator light flashes Not startChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseAligning the appliance Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Large pillowsTechnical data Settings menu J for changing default settings To close the Settings menu Settings menu JTo open the Settings menu Language JExtended cool down Time of dayDrying levels To set the clock formatTo enter the lock code Airways indicatorTo activate the lock code To use the dryer when the lock code is activated To deactivate the lock codeStandby display Keypad toneContrast Brightness MemoryAlteration rights reserved/2008