Miele T 4839 Ci operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 51

Electrical connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply. Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to install a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

51

Image 51

Contents Operating instructions For condenser tumble dryer T 4839 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerSelecting and displaying settings DisplaySelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsEntry menu Before using for the first timeSetting the language Setting the time of dayTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryFurther programmes Select a programmeBefore the end of a programme Select any Extra options / Delay startRemove the laundry when the programme has finished Start the programmeAnti-crease Low temperatureExtra options ShortTo alter delay start Delay startTo select delay start To begin delay startProgramme chart Automatic DelicatesNormal+, Normal, Hand iron r, Hand iron rr, Machine iron Woollens handcareStandard pillows Normal drying level DenimCool air Warm airProofing Normal drying level Silks handcareSportswear OuterwearTimed drying hygiene Hygiene programmesCottons hygiene Normal drying level Minimum iron hygiene Normal drying levelTime remaining Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideFinished Is cancelled,Appears after Programme hasOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Machine afterNot start Problem Possible cause Remedy Programme doesIndicator light flashes When a programme isChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteBefore moving the tumble dryer again e.g. when moving house Aligning the applianceWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings Language J Settings menu JTo open the Settings menu To close the Settings menuTo set the clock format Time of dayDrying levels Extended cool downAirways indicator To activate the lock codeTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedMemory Keypad toneContrast Brightness Standby displayAlteration rights reserved/2008