Miele T 4839 Ci operating instructions Problem solving guide, Fault messages in the display

Page 33

Problem solving guide

With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department.

,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.

Fault messages in the display

Problem

Possible cause

Remedy

 

 

 

l

This is not a fault.

Use the Warm air

Adjust the load

The electronic unit has

programme (timed

+ the programme is

recognised that there is

drying) to dry individual

cancelled, the buzzer

no laundry in the drum

items.

sounds

and cancelled the

To delete the fault

 

programme.

message:

 

Drying individual

Open the door.

 

garments or items which

 

 

 

are already dry can also

 

 

 

cause the programme to

 

 

 

be cancelled.

 

 

q

The condensed water

Empty out the

Please empty

container is full or the

 

condensed water

the container

drain hose has a kink in it

 

container or check the

+ the cooling down

or is blocked.

 

drain hose.

phase starts, the buzzer

 

To delete the fault

sounds

 

message:

 

 

Switch the dryer off and

 

 

 

then back on again.

33

Image 33
Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerSelecting and displaying settings DisplaySelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsSetting the language Before using for the first timeSetting the time of day Entry menuTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerFurther programmes Select a programmeRemove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programmeExtra options Low temperatureShort Anti-creaseTo select delay start Delay startTo begin delay start To alter delay startProgramme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare AutomaticCool air DenimWarm air Standard pillows Normal drying levelSportswear Silks handcareOuterwear Proofing Normal drying levelCottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygieneOnce a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remainingEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideAppears after Is cancelled,Programme has FinishedOther problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit hasIndicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not startChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteBefore moving the tumble dryer again e.g. when moving house Aligning the applianceWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language JDrying levels Time of dayExtended cool down To set the clock formatAirways indicator To activate the lock codeTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedContrast Brightness Keypad toneStandby display MemoryAlteration rights reserved/2008