Miele T 4839 Ci Problem Possible cause Remedy Water leaks from, Machine after, Condenser unit has

Page 36

Problem solving guide

Problem

Possible cause

Remedy

Water leaks from the

– The inner cover of the

–

Ensure that the

machine after the

condenser unit has not

 

condenser unit is

condenser unit has

been locked properly

 

positioned correctly

been cleaned.

and/or the condenser

 

and lock the inner

 

unit has not been

 

cover.

 

positioned correctly.

–

Check the rubber

 

– Fluff has collected in

 

seals.

 

the condenser unit

– Use a cloth to remove

 

housing.

 

any visible fluff from the

 

 

 

inside of the condenser

 

 

 

unit housing.

Items made of synthetic

Synthetic fibres tend to

Static charge can be

fibres are charged with

attract static charge.

reduced by adding a

static electricity after

 

fabric conditioner to the

drying.

 

final rinse in the washing

 

 

programme or a fabric

 

 

conditioner sheet to the

 

 

load when drying.

There is a build-up of

Fluff is principally the

Fluff is collected by the

fluff.

result of friction when

fluff filters and can be

 

garments are being worn

easily removed (see

 

and washed. Machine

"Cleaning and Care").

 

drying hardly causes any

 

 

 

fluff to form and has been

 

 

 

established by research

 

 

 

institutes to have no

 

 

 

appreciable effect on the

 

 

 

lifetime of fabric.

 

 

Feather filled pillows

Feathers are a natural

The smell will dissipate

smell after drying.

product and this is quite

after sufficient airing.

 

normal.

 

 

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operating instructions For condenser tumble dryer T 4839 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelSelecting and displaying settings DisplaySelecting programmes via the display Menu buttons Programme duration / Estimated time remainingBefore using for the first time Setting the languageSetting the time of day Entry menuCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Further programmesSelect any Extra options / Delay start Remove the laundry when the programme has finishedStart the programme Before the end of a programmeLow temperature Extra optionsShort Anti-creaseDelay start To select delay startTo begin delay start To alter delay startProgramme chart Delicates Normal+, Normal, Hand iron r, Hand iron rr, Machine ironWoollens handcare AutomaticDenim Cool airWarm air Standard pillows Normal drying levelSilks handcare SportswearOuterwear Proofing Normal drying levelHygiene programmes Cottons hygiene Normal drying levelMinimum iron hygiene Normal drying level Timed drying hygieneChanging the programme sequence Once a programme has startedAdding or removing laundry after a programme has started Time remainingCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Fault messages in the displayIs cancelled, Appears afterProgramme has FinishedOther problems Problem Possible cause Remedy Water leaks from Been cleanedMachine after Condenser unit hasProblem Possible cause Remedy Programme does Indicator light flashesWhen a programme is Not startChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runBefore moving the tumble dryer again e.g. when moving house Aligning the applianceWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Large pillowsTechnical data Settings menu J for changing default settings Settings menu J To open the Settings menuTo close the Settings menu Language JTime of day Drying levelsExtended cool down To set the clock formatAirways indicator To activate the lock codeTo enter the lock code To use the dryer when the lock code is activated To deactivate the lock codeKeypad tone Contrast BrightnessStandby display MemoryAlteration rights reserved/2008
Top Page Image Contents