Miele T 4839 Ci operating instructions Fit adapter 1 to the sink drain outlet

Installation
		^ Fit adapter 1 to the sink drain outlet
		using nut 2.
		If this nut has a flat disc in it you
		should take the disc out first.
		^ Attach the end of the extension hose
		4 to adapter 1.
		^ Use a screwdriver to tighten hose clip
		3 up close to the nut.
		,Non-return valve 5 has to be
		fitted with the arrow pointing in the
		direction of flow (i.e. towards the
		sink). Otherwise water will not drain
		out of the machine.
		^ Fit non-return valve 5 to the drain
1	Adapter	hose on the dryer 6 (make sure it is
2 Nut		fitted correctly (see arrow on
		non-return valve).
3	Hose clip	^ Secure the non-return valve using
4	Extension hose (accessory)	hose clips.

5Non-return valve (accessory)

6Tumble dryer drain hose

50