Miele T 4839 Ci Delay start, To select delay start, To begin delay start, To alter delay start

Page 19

Delay start

With delay start you can choose when you want the programme to end. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example.

To select delay start

A Select the programme you want and then press the m button.

The indicator light for the m button will light up.

Delay start

10:00

 

 

 

 

 

From: 10:00

to: 11:29

 

 

Change

Back A

 

 

 

 

The display shows the start time (From), the time for the end of the programme (to) and the current time of day.

 

Delay start

10:00

 

 

 

 

 

 

 

 

 

 

From: 11:01

to: 12:30

 

 

 

 

 

ChangeOK

B Use the left hand Menu button under Change to select the time you want the programme to end at.

The first press on the button will adjust the programme end time to the next half or full hour. Each subsequent press on the button will delay the programme end time by 30 minutes.

C Confirm the time you require by pressing the right hand Menu button under OK.

To begin delay start

D Press the Start/Stop button.

Cottons

Start in:

1:01 h

 

 

Normal

The delay start time will now count down in minutes until the start of the programme.

The drum will turn briefly every hour to help prevent creasing.

To add laundry after the delay start time has started counting down

^Open the door and add the laundry.

^Close the door and press the Start/Stop button.

The delay start time will continue to count down.

To alter delay start

^It is possible to change the drying level after the delay start time has begun to count down by pressing one of the Menu buttons.

You can also select a later programme end time once the delay start time has begun to count down if you wish:

^Press the m button.

^Use the left hand Menu button under Change to alter the time you want the programme to end at.

^Confirm by pressing the right hand Menu button under OK.

To cancel delay start

^Press the m button.

^Confirm by pressing the right hand Menu button under Delete.

^To start the programme: Press the Start/Stop button.

19

Image 19
Contents Operating instructions For condenser tumble dryer T 4839 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerDisplay Selecting and displaying settingsSelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsEntry menu Before using for the first timeSetting the language Setting the time of dayTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryFurther programmes Select a programmeBefore the end of a programme Select any Extra options / Delay startRemove the laundry when the programme has finished Start the programmeAnti-crease Low temperatureExtra options ShortTo alter delay start Delay startTo select delay start To begin delay startProgramme chart Automatic DelicatesNormal+, Normal, Hand iron r, Hand iron rr, Machine iron Woollens handcareStandard pillows Normal drying level DenimCool air Warm airProofing Normal drying level Silks handcareSportswear OuterwearTimed drying hygiene Hygiene programmesCottons hygiene Normal drying level Minimum iron hygiene Normal drying levelTime remaining Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideFinished Is cancelled,Appears after Programme hasOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Machine afterNot start Problem Possible cause Remedy Programme doesIndicator light flashes When a programme isChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteAligning the appliance Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings Language J Settings menu JTo open the Settings menu To close the Settings menuTo set the clock format Time of dayDrying levels Extended cool downTo activate the lock code Airways indicatorTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedMemory Keypad toneContrast Brightness Standby displayAlteration rights reserved/2008