Miele T 4839 Ci operating instructions Cleaning the fluff filters, Cleaning them whilst dry

Page 27

Cleaning and care

Cleaning the fluff filters

The fluff which is created by the drying process is collected by the fluff filters in the door and the door opening. Clean the filters after each drying programme*.

Cleaning them whilst dry

Tip: You can also use a vacuum cleaner to remove the fluff.

^Open the door and pull the fluff filter

(1) out of the door as illustrated.

^Use your fingers to remove the fluff from the surface of the filter.

^Remove any fluff from the hollow part of the door opening. You could also use a cleaning brush which is available as an optional extra from your Miele dealer or the Miele Spare Parts Department, or use a vacuum cleaner.

^Also clean the door seal (2) with a damp cloth.

^Once clean, push the filter back into the door holder until it clicks into position. Ensure it is facing the correct way.

^Use your fingers or a vacuum cleaner to remove the fluff from the two fluff filters in the door opening.

^Close the door.

*Always check the fluff filters if the Clean out airways message appears.

27

Image 27
Contents Operating instructions For condenser tumble dryer T 4839 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerSelecting and displaying settings DisplaySelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsEntry menu Before using for the first timeSetting the language Setting the time of dayTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryFurther programmes Select a programmeBefore the end of a programme Select any Extra options / Delay startRemove the laundry when the programme has finished Start the programmeAnti-crease Low temperatureExtra options ShortTo alter delay start Delay startTo select delay start To begin delay startProgramme chart Automatic DelicatesNormal+, Normal, Hand iron r, Hand iron rr, Machine iron Woollens handcareStandard pillows Normal drying level DenimCool air Warm airProofing Normal drying level Silks handcareSportswear OuterwearTimed drying hygiene Hygiene programmesCottons hygiene Normal drying level Minimum iron hygiene Normal drying levelTime remaining Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideFinished Is cancelled,Appears after Programme hasOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Machine afterNot start Problem Possible cause Remedy Programme doesIndicator light flashes When a programme isChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteBefore moving the tumble dryer again e.g. when moving house Aligning the applianceWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings Language J Settings menu JTo open the Settings menu To close the Settings menuTo set the clock format Time of dayDrying levels Extended cool downAirways indicator To activate the lock codeTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedMemory Keypad toneContrast Brightness Standby displayAlteration rights reserved/2008