Miele T 4839 Ci operating instructions Menu buttons, Programme duration / Estimated time remaining

Page 12

Operating the tumble dryer

Menu buttons

Various settings are made via the Menu buttons.

They are used to alter or confirm the value displayed above the vertical line.

To alter a setting:

Cottons

Duration:	1:52 h

Extra dry

Pressing the right or left hand Menu button selects the drying level.

To confirm a setting:

Further programmes

Denim

ContinueOK

Pressing the left hand Menu button under Continue calls up further programmes, and you can then confirm your selection of the highlighted programme by pressing the right hand Menu button under OK.

Programme duration / Estimated time remaining

When a programme is selected, the estimated duration (time remaining) will appear in the display. Please be aware that it is only an estimate!

The following factors all affect the estimated time remaining: residual moisture content after spinning; type of fabric; size of load; room temperature; fluctuations in power supply.

The electronics continually assess conditions in the machine and adjust the estimated time remaining for a more accurate reading. Because of this, the time displayed can alter during the course of a programme.

In the same way, the Woollens handcare, Silks handcare and Smoothing programmes can finish earlier than expected if a certain temperature is reached. This can happen with particularly fine fabrics, very small loads or if items were partly dry beforehand.

12

Image 12

Contents Operating instructions For condenser tumble dryer T 4839 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelSelecting and displaying settings DisplaySelecting programmes via the display Menu buttons Programme duration / Estimated time remainingBefore using for the first time Setting the languageSetting the time of day Entry menuCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Further programmesSelect any Extra options / Delay start Remove the laundry when the programme has finishedStart the programme Before the end of a programmeLow temperature Extra optionsShort Anti-creaseDelay start To select delay startTo begin delay start To alter delay startProgramme chart Delicates Normal+, Normal, Hand iron r, Hand iron rr, Machine ironWoollens handcare AutomaticDenim Cool airWarm air Standard pillows Normal drying levelSilks handcare SportswearOuterwear Proofing Normal drying levelHygiene programmes Cottons hygiene Normal drying levelMinimum iron hygiene Normal drying level Timed drying hygieneChanging the programme sequence Once a programme has startedAdding or removing laundry after a programme has started Time remainingCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Fault messages in the displayIs cancelled, Appears afterProgramme has FinishedOther problems Problem Possible cause Remedy Water leaks from Been cleanedMachine after Condenser unit hasProblem Possible cause Remedy Programme does Indicator light flashesWhen a programme is Not startChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runBefore moving the tumble dryer again e.g. when moving house Aligning the applianceWasher-dryer stack Removing the spacer bars Front panel dimensions Fitting the front panelFitting the front panel Fitting a door front panel made by another manufacturer Preparing the front panelWith spacer bars Without spacer bars Preparing the fixing points Plinth facing dimensions InstallationFitting a plinth facing External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Large pillowsTechnical data Settings menu J for changing default settings Settings menu J To open the Settings menuTo close the Settings menu Language JTime of day Drying levelsExtended cool down To set the clock formatAirways indicator To activate the lock codeTo enter the lock code To use the dryer when the lock code is activated To deactivate the lock codeKeypad tone Contrast BrightnessStandby display MemoryAlteration rights reserved/2008