Miele T 4839 Ci Changing the programme sequence, Once a programme has started, Time remaining

Page 25

Changing the programme sequence

Once a programme has started

- changing the programme

You cannot change to another programme once a programme has started (this prevents unintentional alterations).

If an attempt is made to change a selection, Option not possible will appear in the display.

It is still possible to select or deselect the Buzzer and the Anti-creaseextra option.

You will need to cancel the current programme before you can select a new one.

-cancelling the programme and then selecting a different programme

^Press the Start/Stop button.

The "Stopped" option Cancel programme will appear in the display.

^Confirm by pressing the right hand Menu button under OK.

The items will be cooled down, depending on the temperature reached and how long they have been dried for.

If you press the Start/Stop button during the cooling down phase and confirm by pressing the right hand Menu button under OK, Finished will appear in the display.

^Switch the dryer off.

^Switch the dryer on.

^Select another programme and start it.

-cancelling the programme and then removing the laundry

^Proceed as described in "Adding or removing laundry after a programme has started" below.

^Switch the dryer off after closing the door.

Adding or removing laundry after a programme has started

^Press the Door button.

^Open the door.

,Danger of burning:

Do not touch the back of the drum when adding or removing items. The drum and the items can get very hot.

^Add or remove items as required.

^Close the door.

^Press the Start/Stop button.

Time remaining

The time left shown in the display may now vary from the actual drying time.

25

Image 25
Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerDisplay Selecting and displaying settingsSelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsSetting the language Before using for the first timeSetting the time of day Entry menuTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerFurther programmes Select a programmeRemove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programmeExtra options Low temperatureShort Anti-creaseTo select delay start Delay startTo begin delay start To alter delay startProgramme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare AutomaticCool air DenimWarm air Standard pillows Normal drying levelSportswear Silks handcareOuterwear Proofing Normal drying levelCottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygieneOnce a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remainingEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideAppears after Is cancelled,Programme has FinishedOther problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit hasIndicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not startChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteAligning the appliance Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language JDrying levels Time of dayExtended cool down To set the clock formatTo activate the lock code Airways indicatorTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedContrast Brightness Keypad toneStandby display MemoryAlteration rights reserved/2008