Miele T 4839 Ci operating instructions Cleaning them with water

Page 28

Cleaning and care

Cleaning them with water

If there is a great deal of compacted fluff on any of the filters, they can be removed and cleaned under hot running water.

^Open the door and pull the fluff filter out of the door as described previously.

The two filters in the door opening can also be removed if you need to clean them with water.

^Turn dial a and pull the filter by the dial out of the door opening as shown b. Do the same on the other side.

^Rinse all the filters under hot, running water.

^Then shake the filters until no more water droplets are visible.

^Dry the filters thoroughly with care.

^Clean the area underneath these filters, e.g. with a vacuum cleaner.

,Do not replace them if they are damp or wet. Damp or wet filters could cause operational faults.

^Push the large filter back into the door holder until it clicks into position. Ensure it is facing the correct way.

^Replace the filters in the door opening by first inserting them at the bottom and then pressing them into place at the top.

^Lock both dials.

28

Image 28

Contents Operating instructions For condenser tumble dryer T 4839 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelDisplay Selecting and displaying settingsSelecting programmes via the display Menu buttons Programme duration / Estimated time remainingBefore using for the first time Setting the languageSetting the time of day Entry menuCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Further programmesSelect any Extra options / Delay start Remove the laundry when the programme has finishedStart the programme Before the end of a programmeLow temperature Extra optionsShort Anti-creaseDelay start To select delay startTo begin delay start To alter delay startProgramme chart Delicates Normal+, Normal, Hand iron r, Hand iron rr, Machine ironWoollens handcare AutomaticDenim Cool airWarm air Standard pillows Normal drying levelSilks handcare SportswearOuterwear Proofing Normal drying levelHygiene programmes Cottons hygiene Normal drying levelMinimum iron hygiene Normal drying level Timed drying hygieneChanging the programme sequence Once a programme has startedAdding or removing laundry after a programme has started Time remainingCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Fault messages in the displayIs cancelled, Appears afterProgramme has FinishedOther problems Problem Possible cause Remedy Water leaks from Been cleanedMachine after Condenser unit hasProblem Possible cause Remedy Programme does Indicator light flashesWhen a programme is Not startChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runAligning the appliance Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Large pillowsTechnical data Settings menu J for changing default settings Settings menu J To open the Settings menuTo close the Settings menu Language JTime of day Drying levelsExtended cool down To set the clock formatTo activate the lock code Airways indicatorTo enter the lock code To use the dryer when the lock code is activated To deactivate the lock codeKeypad tone Contrast BrightnessStandby display MemoryAlteration rights reserved/2008