Miele T 4839 Ci Time of day, Drying levels, Extended cool down, To set the clock format

Page 56

Settings menu J

Time (of day)

First select either a 24 hour or 12 hour clock . You can then set the current time of day.

To set the clock format

Clock format

24 h clock B

ContinueOK

^Select the clock format you want with the left hand Menu button under Continue, and confirm your selection with the right hand Menu button under OK.

To set the time

^Select the Time sub-menu and use the Menu buttons to set the time.

Drying levels

You can alter the drying levels for the Cottons and Minimum iron programmes.

The bar chart shows you the setting. Factory default: a medium setting.

–rrr (damper)

The programme duration is shorter.

–r (drier)

The programme duration is longer.

Extended cool down

The cooling down phase which takes place before the end of a programme can be lengthened if required. This makes the garments easier to handle.

The bar chart shows you the setting. Factory default: 0 mins (normal cooling down period)

You can select an extended cool down time in 2 minute increments up to a maximum of 18 minutes.

You cannot extend the cooling down time for the Warm air, Cool air, Timed drying hygiene, Woollens handcare, Silks handcare or Smoothing programmes.

56

Image 56

Contents Operating instructions For condenser tumble dryer T 4839 Ci Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelSelecting programmes via the display Selecting and displaying settingsDisplay Menu buttons Programme duration / Estimated time remainingBefore using for the first time Setting the languageSetting the time of day Entry menuCare symbols Tips on dryingHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect a programme Further programmesSelect any Extra options / Delay start Remove the laundry when the programme has finishedStart the programme Before the end of a programmeLow temperature Extra optionsShort Anti-creaseDelay start To select delay startTo begin delay start To alter delay startProgramme chart Delicates Normal+, Normal, Hand iron r, Hand iron rr, Machine ironWoollens handcare AutomaticDenim Cool airWarm air Standard pillows Normal drying levelSilks handcare SportswearOuterwear Proofing Normal drying levelHygiene programmes Cottons hygiene Normal drying levelMinimum iron hygiene Normal drying level Timed drying hygieneChanging the programme sequence Once a programme has startedAdding or removing laundry after a programme has started Time remainingCleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Replacing the condenser unit Problem solving guide Fault messages in the displayIs cancelled, Appears afterProgramme has FinishedOther problems Problem Possible cause Remedy Water leaks from Been cleanedMachine after Condenser unit hasProblem Possible cause Remedy Programme does Indicator light flashesWhen a programme is Not startChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Building under a continous worktop / in a kitchen runWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseAligning the appliance Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Large pillowsTechnical data Settings menu J for changing default settings Settings menu J To open the Settings menuTo close the Settings menu Language JTime of day Drying levelsExtended cool down To set the clock formatTo enter the lock code Airways indicatorTo activate the lock code To use the dryer when the lock code is activated To deactivate the lock codeKeypad tone Contrast BrightnessStandby display MemoryAlteration rights reserved/2008