Miele T 4839 Ci Installation site, Building under a continous worktop / in a kitchen run

Page 41

Installation

Installation site

,Make sure the dryer door can be opened without hindrance after installation.

Building under a continous worktop / in a kitchen run

This tumble dryer is specially designed for installation under a continuous worktop run in a fitted kitchen.

N= Niche height (820-930 mm)

It is supplied fitted with a cover plate instead of an appliance lid. The cover plate is necessary to ensure electrical safety and must not be removed.

When moving the dryer do not hold it by the door.

–The slides (available to order) should be used to protect the floor from damage when the dryer is pushed into position or taken out for servicing.

–The electrical socket must be located in an accessible position near the machine.

Please note:

Niche height	Accessory
820 mm	None required
from 830-840 mm	Fit longer screw feet* (set to
	approx. 40 mm)

from 870-885 mm	Use one raising kit*
from 915-930 mm	Use two raising kits*

*optional accessory

The dryer must not be used without the front panel in place.

If the kitchen run has a continuous furniture plinth in place, a gap must be made for the tumble dryer.

41

Image 41

Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerSelecting programmes via the display Selecting and displaying settingsDisplay Programme duration / Estimated time remaining Menu buttonsSetting the language Before using for the first timeSetting the time of day Entry menuTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerFurther programmes Select a programmeRemove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programmeExtra options Low temperatureShort Anti-creaseTo select delay start Delay startTo begin delay start To alter delay startProgramme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare AutomaticCool air DenimWarm air Standard pillows Normal drying levelSportswear Silks handcareOuterwear Proofing Normal drying levelCottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygieneOnce a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remainingEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideAppears after Is cancelled,Programme has FinishedOther problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit hasIndicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not startChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseAligning the appliance Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Large pillows Consumption dataTechnical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language JDrying levels Time of dayExtended cool down To set the clock formatTo enter the lock code Airways indicatorTo activate the lock code To deactivate the lock code To use the dryer when the lock code is activatedContrast Brightness Keypad toneStandby display MemoryAlteration rights reserved/2008