Miele T 4839 Ci Fitting a plinth facing, Plinth facing dimensions, Installation

Page 47

Installation

Fitting a plinth facing

The gap between the lower edge of the tumble dryer plinth and the floor can be closed up using a suitable kitchen furniture plinth facing.

The tumble dryer plinth has a special groove in which a plinth facing can be fitted.

Plinth facing dimensions

Length: 592 - 596 mm

Thickness: 8 mm

Height (H): The plinth facing height must be calculated after aligning the height of the appliance with the screw feet or after fitting the raising kit(s).

Installation

^Calculate height (H) from the floor up into the groove (on the underside of the tumble dryer).

^Cut the plinth facing to size.

^Slide it into the groove.

Useful tip:

If the dryer is fitted on a raising kit, you can use double-sided adhesive tape on the back of the plinth facing to secure it to the raising kit.

47

Image 47

Contents Operating instructions For condenser tumble dryer T 4839 Ci Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerSelecting programmes via the display Selecting and displaying settingsDisplay Programme duration / Estimated time remaining Menu buttonsEntry menu Before using for the first timeSetting the language Setting the time of dayTips on drying Care symbolsTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryFurther programmes Select a programmeBefore the end of a programme Select any Extra options / Delay startRemove the laundry when the programme has finished Start the programmeAnti-crease Low temperatureExtra options ShortTo alter delay start Delay startTo select delay start To begin delay startProgramme chart Automatic DelicatesNormal+, Normal, Hand iron r, Hand iron rr, Machine iron Woollens handcareStandard pillows Normal drying level DenimCool air Warm airProofing Normal drying level Silks handcareSportswear OuterwearTimed drying hygiene Hygiene programmesCottons hygiene Normal drying level Minimum iron hygiene Normal drying levelTime remaining Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideFinished Is cancelled,Appears after Programme hasOther problems Condenser unit has Problem Possible cause Remedy Water leaks fromBeen cleaned Machine afterNot start Problem Possible cause Remedy Programme doesIndicator light flashes When a programme isChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseAligning the appliance Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Large pillows Consumption dataTechnical data Settings menu J for changing default settings Language J Settings menu JTo open the Settings menu To close the Settings menuTo set the clock format Time of dayDrying levels Extended cool downTo enter the lock code Airways indicatorTo activate the lock code To deactivate the lock code To use the dryer when the lock code is activatedMemory Keypad toneContrast Brightness Standby displayAlteration rights reserved/2008