Miele T 4839 Ci Problem Possible cause Remedy Programme does, Not start, Display is dark, Come on

Page 37

 

Problem solving guide

 

 

 

 

 

 

 

Problem

Possible cause

Remedy

The programme does

No obvious cause.

– Is the dryer switched on?

not start and the

 

– Is the plug correctly

display is dark.

 

 

inserted in the socket and

 

 

 

switched on?

 

 

Is the appliance door

 

 

 

closed properly?

 

 

Has the fuse or circuit

 

 

 

breaker tripped?

The interior drum

The lighting switches off

Switch the dryer off and then

lighting does not

automatically (to save

on again.

come on.

energy).

 

 

 

The lamp needs

Change the lamp as

 

changing.

described at the end of this

 

 

section.

The display is in a

A different language

Set the language you want.

different language.

has been selected.

The flag symbol will guide you.

 

 

See "Language" at the end of

 

 

this booklet.

The Start/Stop button

This is not a fault.

After the programme has

indicator light flashes

The flashing indicates

started, the flashing will

when a programme is

that a programme can

change to a constant light.

being selected.

be started.

 

 

The display is dark.

The display has

The display will light up when

The Start/Stop button

switched off

one of the buttons is pressed.

indicator light flashes

automatically to save

 

 

slowly.

energy (Standby

 

 

 

mode).

 

 

 

If the problem

Contact the Miele Service

 

continues there is a

Department.

 

fault.

 

 

37

Image 37
Contents Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerDisplay Selecting and displaying settingsSelecting programmes via the display Programme duration / Estimated time remaining Menu buttonsSetting the language Before using for the first timeSetting the time of day Entry menuTips on drying Care symbolsBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerFurther programmes Select a programmeRemove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programmeExtra options Low temperatureShort Anti-creaseTo select delay start Delay startTo begin delay start To alter delay startProgramme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare AutomaticCool air DenimWarm air Standard pillows Normal drying levelSportswear Silks handcareOuterwear Proofing Normal drying levelCottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygieneOnce a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remainingEmptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guideAppears after Is cancelled,Programme has FinishedOther problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit hasIndicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not startChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationBuilding under a continous worktop / in a kitchen run Installation siteAligning the appliance Before moving the tumble dryer again e.g. when moving houseWasher-dryer stack Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel Preparing the front panel Fitting a door front panel made by another manufacturerWith spacer bars Without spacer bars Preparing the fixing points Installation Plinth facing dimensionsFitting a plinth facing General notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveFit adapter 1 to the sink drain outlet Electrical connection Non-rewireable plugs BSElectrical connection U.K Large pillows Consumption dataTechnical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language JDrying levels Time of dayExtended cool down To set the clock formatTo activate the lock code Airways indicatorTo enter the lock code To deactivate the lock code To use the dryer when the lock code is activatedContrast Brightness Keypad toneStandby display MemoryAlteration rights reserved/2008