REMOVING THE DOOR LOCK / SWITCH ASSEMBLY,
AND THE FRONT PANEL & BELLOWS
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug washer or disconnect power.
2.Turn off the water supply to the washer.
3.Remove the top cover and the console (see page
4.Remove the three
5.Open the washer door.
Door Lock/Switch Assembly
Bellows
Retaining Wire
6.Starting at the bottom, use a small screw- driver, and pry the retaining wire from around the front of the bellows. NOTE: There is a tension spring at the bottom of the wire that can be separated to remove the wire.
Tension Spring
Toe Panel
Screws