Whirlpool MFW 9700S, MFW 9600S manual Removing the Drain Pump Assembly

REMOVING THE DRAIN PUMP ASSEMBLY

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer.

3.Remove the three T-20 hex-head torx screws from the toe panel and remove the panel.

4.Raise the drain pump wiring cover and disconnect the wire connector.

Wiring Cover

Pump Wire Connector

5.Loosen the clamps, and disconnect the drain and tub hoses from the drain pump.

6.Slide the drain pump forward in its mount- ing slots and lift it out of the washer.

Tub Hose Drain Hose

Screws

Toe Panel

Drain Pump Assembly

4-17