Whirlpool MFW 9700S, MFW 9600S manual Detergent Dispenser, Motor & Switch

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

DETERGENT DISPENSER	INLET VALVE SOLENOIDS
MOTOR & SWITCH

Refer to page 4-8 for the procedure for servic- ing the detergent dispenser motor.

1.Unplug washer or disconnect power.

2.Disconnect the detergent dispenser mo- tor and switch connector from the CCU.

3.Set the ohmmeter to the R x 100 scale.

4.Touch the ohmmeter test leads to the indicated wire connector terminals. The meter should indicate as follows:

Dispenser motor at pins 1 and 3 = 1400 to 1600 Ω.

Dispenser switch at pins 5 and 6 = 0 Ω

65 3 1

(Connector viewed From Wire End)

COLD HOT

Refer to page 4-10 for the procedure for servic- ing the inlet valves.

1.Unplug washer or disconnect power.

2.Disconnect the inlet valve solenoid con- nector from the CCU.

3.Set the ohmmeter to the R x 100 scale.

4.Touch the ohmmeter test leads to the indicated wire connector terminals. The

meter should indicate between 750 and 850 Ω.

7 5 3 1

(Connector viewed From Wire End)

5-2