d)Remove the motor and switch wires from the wire clip.
e)Disconnect the two wire connectors from the motor terminals. NOTE: The connector with the blue stripe (motor connector) is installed above the con- nector with no color indicator (dispenser switch connector).
Motor (Blue
Stripe)
Disp. Sw. |
|
(No Color) | Wire Clip |
|
5.To remove the detergent dispenser as- sembly:
a)Remove the front panel from the washer (see pages
b)Remove the detergent dispenser mo- tor (see step 4).
c)Use a small screwdriver and raise the locking arm so that it clears the tab. Pull the inlet hose connector and rub- ber
d)Loosen the clamp and pull the tub hose from the detergent dispenser.
e)Remove the main inlet tube from the bellows.
f)Remove the two screws from the de- tergent dispenser and remove the dis- penser from the washer.
Tab
Rubber
Locking Arm
Tub Hose
Detergent
Dispenser
Screws
Main Inlet
Tube