REMOVING THE TEMPERATURE SENSOR
& THE HEATING ELEMENT
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug washer or disconnect power.
2.Turn off the water supply to the washer.
3.Remove the three
4.Use a 13/32”(10 mm) socket and loosen the hex nut on the heating element bracket.
5.To remove the temperature sensor:
a)Disconnect the sensor connector.
b)Pull the sensor out of the heating ele- ment bracket hole.
Pull Out Sensor
Sensor | Hex Nut |
Connector |
Toe Panel
Screws
Ground Wire
Element Wires
6.To remove the heating element:
a)Remove the temperature sensor (see step 5).
b)Disconnect the element wires and the green ground wire from the terminals.
c)Pull the heating element and tempera- ture sensor out of the tub.
Heating
Element
Heating Element & Temperature Sensor