Maytag MAH-3 operating instructions Step, i I SNG THE CONTROLS, Chime

i I S[NG THE CONTROLS

Contro! features vary by model

Step

Press the arrow pad to select the Soil Level/washing time.

Heavy - Use for cleaning heavily soiled loads.

Medium - Use for cleaning moderately soiled loads.This setting will be appro- priate for most loads.

Soil Level

Light - Use for cleaning lighdy soiled loads,

Step

Press the appropriate pad(s) to select one or more options.The indicator light above the pad will illuminate when the option is selected.

Delay -Any cycle can be delayed for up to 9, 12 or 19 hours (select models) in one hour increments.

I. Make the appropriate selections for your load. ii¸Delayi!

2.Press the Delay pad until the desired delay time appears in the display.

3.Press the Cycle Selector diaLThe delay time will start counting down.

4.To cancel a delay, press the Power Off pad and restart.

Chime - Press the Chime pad to increase or decrease the end of cycle signal

.....,......................./

volume or turn the signal off,

Chime

Control Lock -Thewasher controls can be locked to prevent

unwanted use by children.

I. Press the Wash/Ainse Te_p and Spin Speed pads at the same time for three seconds.

Wash/Rinse Temp

Auto len_p Co,,ttol

2.The Control Lock light will illuminate.

3.To unlock, press the Wash/Ainse Temp and Spin Speed pads at the same time for three seconds.The Control Loci< light will go out,

COnt.

6