Maytag MAH-3 operating instructions Contro! features vary by model

Contro! features vary by model

After setting the cycle and pressing Cyde Selector dial, the display will show the esti-

mated minutes remaining in the cycle_The estimated time remaining may fluctuate to bet-

ter indicate the wash time left in the cycle_

Door Lock - lights whenever the door of the clothes washer is Iocked_The door can

be unlocked by pressing the Cycle Selector dial to pause the washer_

Contro! Lock -Thewasher controls can be locked to prevent unwanted use by chil- dren_

I_ Press the Wash/R!nse Temp and Spin Speed pads at the same time for three seconds_

2,The Control Loci< light will illuminate,

3,To unlock, press the Wash/Rinse Temp and Spin Speed pads at the same time for three seconds, The Control Loci< light will go out,

Cy¢!e indicator Lights -TheWash, Rinse and Spin lights at the top of the control panel will illuminate progressively to indicate when the washer is in those portions of the

cycle,These lights will flash when the cycle has been paused,

Wash/Rinse Temp Spin Speed

Auto Temp Cor_troi

Pad indicator Lights -Theindicator lights above the pads will illuminate when the

pad is selected,

Cycle Setting indicator Lights - Indicator lights by the cycle settings will illuminate when the selection is made,

The amount of water used will vary with each load,The blaytag Neptune ® clothes washer will automatically provide the appropriate amount of water for efficient cleaning perform- ance and conservation of water and energy, Fill time will vary depending on water pressure,

8