Kenmore w10034900 manual Timed, Dry, Auto DRY

Load clothes loosely into the dryer. Do not pack the dryer. Allow space for clothes to tumble freely. The following chart shows the maximum load you can place in your compact dryer. Expect longer drying times.

Heavy	work	2	pair	of pants,		3 work	shirts
clothes
Delicates		1 camisole, 2 slips, 4 undergarments,
		1 set of sleepwear, 1 half slip
Towels		9	bath	towels;		or 6 bath	towels,	3 hand
		towels,		6 washcloths
Mixed	Load	2	pillowcases,			1 T-shirt,	2 shirts,	1 pair
		slacks
Knits		2	slacks,		2 shirts; or 3 dresses
Perm.	Press	6	shirts;		or 2 double sheets & 2 pillowcases;
		or 2 single sheets & 2 pillowcases

Select the correct cycle for your load.

Your dryer tumbles the load without heat during the last few minutes of all cycles to make the load easier to handle.

Drying tips

•Follow care label directions when they are available.

•If desired, add a fabric softener sheet. Follow package instructions.

•Remove the load from the dryer as soon as tumbling stops to reduce wrinkling. This is especially important for permanent press, knits, and synthetic fabrics.

Cycle and temperature tips

•Dry most loads using the Normal Dry setting (*).

•Use a no heat (air) setting for rubber, plastic, or heat-sensitive fabrics.

•Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for various loads, refer to the care label directions.

LESS DRY	TIMED
	DRY
	75
AUTO DRY	80
NORMALDRY--(
	$5
MORE DRY-	_ \
	3O
	OFE

A(R DRY

Cycle Control knob

Auto Dry II

Use this cycle to dry most loads. Dryness is determined by thermostats that react to the amount of moisture in the air

exhausted from the dryer. Moist air indicates clothes are damp. Dry air indicates that moisture has been removed.

This cycle includes a 10 minute (approximately) cool down period at the end of the cycle to make clothes easier to handle and reduce wrinkling.

Dry most loads using the Normal Dry (,) setting. When the cycle ends, check the dryness of the load.

•If the load is drier than you like, select a setting closer to LESS DRY the next time you dry a similar load.

•If the load is not as dry as you like, complete drying using the Timed Dry cycle. The next time you dry a similar load, select a setting closer to MORE DRY.

NOTE: Drying time with an automatic cycle varies according to the type of fabric, size of load, and temperature setting. See "Drying, Cycle and Temperature Tips."

Timed Dry

Use this cycle to complete drying if items are still damp after the Auto Dry II cycle. Timed Dry is also useful for heavyweight and bulky items, such as bedspreads, work clothes, and large loads that require a long drying time. Use this cycle to get up to

105 minutes of heated drying time. The heating cycle is followed by a 10 minute (approximately) cool down period.

Air Dry

Use the Air Dry cycle for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This chart shows examples of items that can be dried using an air cycle.

Type of Load			Minutes*
Foam rubber--pillows,		padded bras, stuffed toys	20	- 30
Plastic--shower	curtains, tablecloths		20	- 30
Rubber-backed	rugs		40	-	50
Olefin, polypropylene,		sheer nylon	10	-	20

*Reset time as needed to allow items to dry completely. When using Air Dry

•Check to see that coverings are securely stitched.

•Shake and fluff pillows by hand periodically during the cycle.

•Dry item completely. Foam rubber pillows are slow to dry.

End of Cycle Signal

Your dryer sounds a signal when a drying cycle is finished.This signal is helpful when you are drying items that need to be removed as soon as the dryer stops in order to prevent wrinkles.

11