5. Dryer Pre-Start Checks
Dryer Shut Down
To shut down the dryer, first close the fuel supply valve at the tank or valve along the fuel line. If the burner is operating, let the dryer run out of fuel, and it will shut down automatically due to loss of flame. Close the fuel valve at the dryer, and press the dryer power stop button. Turn OFF the safety disconnect handle on the front of the power box, and turn OFF the main power to the dryer.
Stopping Dryer Operation
To stop operation of the dryer, push the dryer power stop button. The fan, burner and all augers will stop immediately.
Emergency Stop
In case of emergency, push the emergency stop button located at the bottom of the Upper Control Box. (See Page 6.)
|
|
| Figure 5C |
The dryer fan/heater controls featuring: |
| ||
|
|
|
|
| Ref # |
| Description |
|
|
|
|
| 1 |
| Pressure Regulator |
| 2 |
| |
| 3 |
| High Pressure Solenoid |
| 4 |
| Low Pressure Solenoid |
| 5 |
| Supply Line Solenoid |
26