2. Safety Alert Decals
WARNING! 
Moving parts can crush and cut. Keep hands clear. Do not operate without guards in place. Failure to do so could result in serious injury.
Decal: DC-972
Decal DC-972 is located on the bottom auger belt guard and the front bearing plate (which is visible when the bottom auger belt guard is removed). An alternate location would be at the rear of the dryer for portable dryers equipped with the Front Discharge Option.
DC-972
WARNING! Decal: DC-971
Automatically controlled belt drive can start at anytime. Keep hands clear. Failure to do so could result in serious injury.
DC-971
Rotating auger will crush and cut. Auto equipment can start at anytime. Do not enter until electric power is locked in off position. Failure to do so will result in serious injury or death.
DC-974
Decal DC-971 is located on the bottom auger belt guard and the front bearing plate (which is visible when the bottom auger belt guard is removed). An alternate location would be at the rear of the dryer for portable dryers equipped with the Front Discharge Option.
An additional location for decal DC-971 is the top auger belt guard (one on the belt guard cover and another one is on the inside belt guard body visible when the belt guard cover is removed).
Decal: DC-974
Decal DC-974 has several different locations. Two are located on the front end panel below the fan/heater. Two are located on the rear end panel below the rear access door. Two are located on the auger discharge box (one on the outside top and one on the inside of the flapper lid next to the discharge mercury switch). One more of these decals is located inside the plenum on the rear plenum closure door just inside the rear access door.
PNEG-552100 Series Dryer
