American Dryer Corp AD-310 Phase 7 Sprinkler Option Temperature Controller Settings

Sprinkler Option Temperature Controller Settings

NOTE: Refer to Controller’s User’s Manual for further information on controller options.

Message	Message	Settings
Display	Description
SECr	SECURITY CODE	FULL SECURITY - SET TO 110 (DISPLAYED AS 1) "VIEW ONLY"
		NO SECURITY - SET TO 111 (DISPLAYED AS 4)
		"ALL FEATURES UNLOCKED"
InP	INPUT DEVICE	P 385 = RTD INPUT
F-C	º F OR º C	SELECT TYPE REQUIRED (FAHRENHEIT OR CELSIUS)
dPt	DECIMAL POINT	0, NO DECIMAL POINT
InPt	INPUT FAULT TIMER	0.2
SPL	SET POINT LOW	500 (SETTING CANNOT BE LOWER)
SPH	SET POINT HIGH	700 (SETTING CANNOT BE HIGHER)
SPSt	SET POINT STATE	rE (REVERSE ACTION)
SPLP	SET POINT LAMP	0 oFF (LAMP OFF WHEN OUTPUT IS ON)
AL	HIGH ALARM ONLY	Hi
ALt	ALARM TYPE	Abs (ABSOLUTE ALARM)
ALrE	ALARM RESET	OnOF (AUTOMATIC RESET)
ALPi	ALARM POWER	OFF (ALARM INHIBIT IS OFF)
	INTERRUPT
ALiH	ALARM INHIBIT	OFF (ALARM INHIBIT IS OFF)
ALSt	ALARM OUTPUT	CLOS
	STATE	(CLOSES CONTACTS AT ALARM SET POINT)
ALLP	ALARM LAMP	0 ON (ALARM LAMP IS ON WHEN ALARM CONTACT IS CLOSED)
ALHi	ALARM HI	575º F OR 301.6º C (NOTE: ADJUST SAME AS SP)
Cy	CYCLE RATE	OnOF
SP_d	SET POINT ON-OFF	-1
	DIFFERENTIAL
rt	RAMP TIME	OFF
InPC	INPUT CORRECTION	0
FiLt	DIGITAL FILTER	2
SP	TEMPERATURE	575º F OR 301.6º C
	SET POINT

Note: When message display (Cy) set to OnOF.

SPOL (SET POINT OUTPUT LOW LIMIT) not in use.

SPOH (SET POINT OUTPUT HIGH LIMIT) not in use.

Are not displayed.

75