MORE CYCLES
More Cycles offers the ability to choose “wrinkle release”, “freshen up”, and “dryel” cycles.
SETTING WRINKLE RELEASE
“wrinkle release” – will release wrinkles from items that are clean and dry but slightly wrinkled, such as from a crowded closet or suitcase or from sitting in the dryer too long after the end of the cycle. It provides 8 minutes of heated tumbling and 10 minutes of cool down tumbling without heat.
Step 1 | Step 2 | Step 3 |
Touch “more cycles” on the Home screen.
Touch the up or down arrow to set the time to tumble. The time will increase or decrease by one minute increments. Press “continue” when done.
SETTING FRESHEN UP
Select “wrinkle release”.
Touch the appropriate temperature for the load.
Review Screen – The default settings for “wrinkle release” are 18 minutes of tumbling using regular temperature heated air. You may press Start/Pause to begin or select any of the areas on the touchscreen to further customize the “wrinkle release” cycle.
Options Screen – The following options may be added to customize your “wrinkle release” cycle:
•“wrinkle prevent”
•“end of cycle chime”
•“remind chime”
See page 7 for a detailed description of these options. When the desired selections are made, touch “continue” to see the review screen once again.
“freshen up” – the “freshen up” cycle is designed to activate a fabric softener sheet. There are 5 minutes of heated tumble followed by 10 minutes of tumble in unheated air.
Step 1 | Step 2 | Step 3 |
Touch “more cycles” on the | Add a fabric softener sheet to the |
Home screen. | load. Select “freshen up”. |
9
Review Screen – The default settings for “freshen up” are 15 minutes of tumble using extra low temperature heated air. You may press Start/Pause to begin or select any of the areas on the touchscreen to further customize the “freshen up” cycle.