SETTING SENSOR DRY
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to “wake” the controls.
“sensor dry” – automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (very dry to damp dry) is reached.This cycle is recommended for the majority of loads including delicates, wrinkle free and cotton/sturdy items like towels, bedding and jeans.
Step 1
Select “sensor dry”. The next screen will be the Review Screen. If the selections are correct, press Start/Pause. If changes need to be made, follow the next steps.
Step 2
Select dryness level. The dryness level ranges from very dry to damp dry. Select the level appropriate for the load. The “normal dry” level will be used for most loads.
very dry – used to completely dry sturdy or bulky items including towels and jeans.
more dry – uses slightly less time to dry than very dry with similar results. May find some blue jean seams slightly damp.
normal dry – used for drying the majority of loads.
less dry – still provides the benefit of the load being slightly damp, but items will dry faster once they are laid flat or hung to dry.
damp dry – designed to partially dry items. Used for items that lay flat or hang to dry.
regular – for sturdy cottons or those labeled “Tumble Dry.”
medium – for permanent press, synthetics, lightweight cottons or items labeled “Tumble Dry Medium.”
delicate – for heat sensitive items labeled “Tumble Dry Low” or “Tumble Dry Warm.”
extra low – Provides the lowest heated dry temperature possible. “Extra Low Temperature” is lower than “Delicate.”
Step 3
Select appropriate temperature; “regular”, | Cont. |
“medium”, “delicate” or “extra low”. |
6