Step 4
Select Cycle
To select a cycle, push in and rotate the control dial to the desired setting. When using an IntelliDry cycle, the control dial should point to “Normal Dry” for most loads.
Loads of larger or bulkier size may require the “More Dry” setting to completely dry the load. The “Less Dry” setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Permanent Press IntelliDry
The Permanent Press IntelliDry cycle is designed to dry wrinkle free cottons, synthetic fabrics, double knits and permanent press fabrics automatically. It minimizes wrinkling by providing an unheated
Special Options
Damp Dry is located on the Time Dry/Air Fluff section of the dial. It is designed to partially dry items and can be used with any temperature selection. Damp Dry will provide 20 minutes of tumbling time, followed by 5 minutes of
Control features vary by model.
Regular IntelliDry
The Regular IntelliDry cycle is designed to dry loads such as towels, underwear,
Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use with Air Fluff, Extra Low (select models), Delicate, Medium or Regular tem- perature settings. For timed dry- ing, turn the control dial until the pointer points to the proper time setting in the Time Dry/Air Fluff cycle.
NOTE: Using the Air Fluff tem- perature setting will require a longer drying time.
Wrinkle Release will release wrinkles from items that are clean and dry but only slightly wrinkled, such as from a crowded closet or suitcase, or from sitting in the dryer too long after the cycle has ended. Wrinkle Release pro- vides 10 minutes of tumbling followed by five minutes of
4