![](/images/new-backgrounds/1043284/4328431x1.webp)
SpecificationsA Title (English)
Power source | 14.4 V DC (10.8 V to 15.1 V allowable) |
Grounding system | Negative type |
Current consumption | 25 A (at continuous power, 4 Ω) |
Average current drawn* | 8 A (4 Ω for two channels) |
| 17 A (4 Ω for one channel) |
| 17 A (2 Ω for two channel) |
Fuse | 30 A ⋅ 2 |
Dimensions | 301 (W) mm ⋅ 57 (H) mm ⋅ 213 (D) mm |
| [12 (W) in. ⋅ |
Weight | 3.4 kg (7.5 lbs.) (Leads for wiring not included) |
Maximum power output | 300 W ⋅ 2 (4 Ω) / 1 200 W ⋅ 1 (4 Ω) |
Continuous power output | 150 W ⋅ 2 (at 14.4 V, 4 Ω, 20 Hz to 20 kHz 1.0% THD) |
| 600 W ⋅ 1 (at 14.4 V, 4 Ω, 1 kHz 1.0% THD) |
| 300 W ⋅ 2 (at 14.4 V, 2 Ω, 1 kHz 1.0% THD) |
Load impedance | 4 Ω (2 Ω to 8 Ω allowable) |
Frequency response | 10 Hz to 50 kHz (+0 dB, |
100 dB | |
Distortion | 0.005 % (10 W, 1 kHz) |
Separation | 70 dB (1 kHz) |
| 60 dB (100 Hz to 10 kHz) |
Low pass filter | Cut off frequency: 40 Hz to 500 Hz |
| Cut off slope: |
High pass filter | Cut off frequency: 40 Hz to 500 Hz |
| Cut off slope: |
Bass boost | Frequency: 50 Hz |
| Level: 0, 6, 9, 12 dB |
Gain control | RCA: 400 mV to 6.5 V |
| Speaker: 1.6 V to 26 V |
Maximum input level / impedance | RCA: 6.5 V / 22 kΩ |
| Speaker: 26 V / 90 kΩ |
Power output ...................................................................................... 150 W RMS ⋅ 2 channels | |||
| (4 Ω and |
| 1 % THD+N) |
|
| ||
| 600 W RMS ⋅ 1 channel | ||
| (4 Ω and |
| 1 % THD+N) |
|
| ||
| 300 W RMS ⋅ 2 channels | ||
| (2 Ω and |
| 1 % THD+N) |
|
| ||
80 dBA (Reference: 1 W into 4 Ω) | |||
|
|
|
|
Note:
•Specifications and the design are subject to possible modification without notice due to improvements.
*Average current drawn
•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.
15