2 Installing Your System | Quick Reference Guide | |
|
|
|
3Route each cord through the wire manager on the front of the module.
4Connect the free end of each line cord to the appropriate network interface jack.
5Test the lines by plugging a system telephone into extension jack 10. Press the line button for each outside line and listen for a dial tone.
6Test the extensions by doing the following:
•Plug a system telephone into the first extension jack on each module.
•Press the line button on the telephone for each outside line and listen for a dial tone.
7Connect modular telephone cords to the extension jacks, starting at the top extension jack on the processor module. When that module is full, move to the leftmost module. Fill each module before moving on to the next module to the right. Note that extension 10 and extension 11 have system administration privileges.
8Route each cord through the wire manager on the front of the module.
9Connect the free end of each modular telephone cord to the modular wall jacks for system extensions.
10Gather the line and extension cords hanging below the wire managers of the first two modules, and
24 Connecting Lines and Extensions