Centralized Telephone Programming Flow Chart—How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
•To Enter Programming Mode:
—Press
—Press
f 0 0
s s c
—Dial the extension number to be programmed. Buttons on to whic h lines or pools are assigned light up to show the current Line Ringing setting: remaining buttons can be programmed with Auto Dial number or features
•To Program Another Feature at the Same Extension:
—After you program one feature, continue with the instructions in the box for the next feature
•To Change Setting for Another Extension
—Press c
—Dial the new extension’s number
•To Erase a Feature or Auto Dial Button:
—Press the programmed button
—Press !
•To End Programming Mode:
—Press f 0 0
IconDescription
= Factory setting
= Button with lights required
= Button with lights recommended
109