Quick Reference Guide | 3 Setting Up Your System | |
|
|
|
|
|
|
Setting the Date and Time
After supplying power to the control unit, use the following procedures to set the system clock:
•System Date (#101) to set the month, day, and year
•System Time (#103) to set the hour and minutes
•Automatic Daylight/Standard Times (#126) to automatically update the system clock
System Date (#101)
Use this feature to set the month, day, and year. The system displays only the month and day on display telephones when the telephone is idle; the month, day, and year print on SMDR call reports.
To change the System Date:
1Press f00ss#101at extension 10 or 11.
2Enter today’s date in the form “mmddyy” (month, day, and year), including leading zeros for
3Select another procedure, or exit programming mode.
System Time (#103)
Use this feature to set the time that appears on system display telephones. Enter the time in
(12 midnight) to 2359 (11:59 p.m.). Since each time must have four digits, use leading zeros when necessary.
To change the System Time:
1Press f00ss#103at extension 10 or 11.
2Enter a new time in
Setting the Date and Time 37